| 秦红星,齐铁力.基于UG的模具自由曲面数控加工工艺规划研究[J].唐山学院学报,2015,28(3):45-48, 51 |
| 基于UG的模具自由曲面数控加工工艺规划研究 |
| On Design of UG-based NC Machining Process of Mold Free-form Surface |
| 投稿时间：2014-11-06 |
| DOI： |
| 中文关键词: 模具 自由曲面 数控加工工艺 UG 中图 |
| 英文关键词: mold free-form surface NC machining process UG |
| 基金项目:唐山市科技计划项目(131302112b)；唐山市机电一体化重点实验室项目(140080308) |
|
| 摘要点击次数: 7278 |
| 全文下载次数: 5941 |
| 中文摘要: |
| 对模具自由曲面数控加工工艺的规划方法进行研究,建立了适于模具自由曲面数控加工的工艺规划。针对某模具的自由曲面,根据工艺规划得到的自由曲面加工工艺参数,在UG NX 8.0中设定各项参数,生成刀具加工路径,进行仿真加工,获得其数控加工代码。实例加工证明,该规划方法使模具加工工艺信息得到了最大程度地有效利用,降低了模具设计的工作量,提高了生产效率,降低了设计成本。 |
| 英文摘要: |
The authors of this paper, based on their research into the design methods of mold free-form surface NC machining process,have designed a process suitable for mold free-form surface NC machining.
cording to the machining process parameters of the free-form surface of the mold used in this experiment, the parameters in UG NX 8.0 are set, the tool machining path is generated and the machining process is simulated.
e results shows that this design method makes the maximum use of the mold processing information, reduces the workload of mold design, improves the production efficiency and reduces the design costs. |
|
查看全文
查看/发表评论 下载PDF阅读器 |
| 关闭 |
|
|
|